dmesg - PTS Memory Benchmark
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.18.5-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 30 07:31:50 CET 2015
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000917ff] usable
BIOS-e820: [mem 0x0000000000091800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x0000000094daffff] usable
BIOS-e820: [mem 0x0000000094db0000-0x00000000961affff] reserved
BIOS-e820: [mem 0x00000000961b0000-0x000000009aabefff] usable
BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Alienware M14xR2/M14xR2, BIOS A13 05/17/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FE0000000 write-back
2 base 09B000000 mask FFF000000 uncachable
3 base 09C000000 mask FFC000000 uncachable
4 base 0FF800000 mask FFF800000 write-protect
5 base 100000000 mask F00000000 write-back
6 base 200000000 mask E00000000 write-back
7 base 400000000 mask F80000000 write-back
8 base 45F600000 mask FFFE00000 uncachable
9 base 45F800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01b36000, 0x01b36fff] PGTABLE
BRK [0x01b37000, 0x01b37fff] PGTABLE
BRK [0x01b38000, 0x01b38fff] PGTABLE
init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[mem 0x45f400000-0x45f5fffff] page 2M
BRK [0x01b39000, 0x01b39fff] PGTABLE
init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
[mem 0x45c000000-0x45f3fffff] page 2M
init_memory_mapping: [mem 0x400000000-0x45bffffff]
[mem 0x400000000-0x45bffffff] page 2M
BRK [0x01b3a000, 0x01b3afff] PGTABLE
init_memory_mapping: [mem 0x00100000-0x1fffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1fffffff] page 2M
init_memory_mapping: [mem 0x20200000-0x40003fff]
[mem 0x20200000-0x3fffffff] page 2M
[mem 0x40000000-0x40003fff] page 4k
BRK [0x01b3b000, 0x01b3bfff] PGTABLE
init_memory_mapping: [mem 0x40005000-0x94daffff]
[mem 0x40005000-0x401fffff] page 4k
[mem 0x40200000-0x94bfffff] page 2M
[mem 0x94c00000-0x94daffff] page 4k
init_memory_mapping: [mem 0x961b0000-0x9aabefff]
[mem 0x961b0000-0x961fffff] page 4k
[mem 0x96200000-0x9a9fffff] page 2M
[mem 0x9aa00000-0x9aabefff] page 4k
init_memory_mapping: [mem 0x9afff000-0x9affffff]
[mem 0x9afff000-0x9affffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
RAMDISK: [mem 0x37922000-0x37c88fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 ALWARE)
ACPI: XSDT 0x000000009AFFE210 0000BC (v01 ALWARE ALIENWRE 00000001 01000013)
ACPI: FACP 0x000000009AFFA000 00010C (v05 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DSDT 0x000000009AFEC000 00A06D (v01 ALWARE ALIENWRE 00000000 ASL 00040000)
ACPI: FACS 0x000000009AFB9000 000040
ACPI: SLIC 0x000000009AFFD000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: UEFI 0x000000009AFFC000 000236 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: ASF! 0x000000009AFFB000 0000A5 (v32 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: HPET 0x000000009AFF9000 000038 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: APIC 0x000000009AFF8000 00008C (v03 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: MCFG 0x000000009AFF7000 00003C (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SLIC 0x000000009AFEB000 000176 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFEA000 0006FE (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
ACPI: BOOT 0x000000009AFE8000 000028 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFE7000 000406 (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
ACPI: ASPT 0x000000009AFE6000 000034 (v07 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: DBGP 0x000000009AFE5000 000034 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: FPDT 0x000000009AFE3000 000044 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFE2000 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
ACPI: SSDT 0x000000009AFE1000 000A92 (v01 PmRef CpuPm 00003000 INTL 20130117)
ACPI: DMAR 0x000000009AFE0000 0000B8 (v01 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFDC000 002178 (v01 NvdRef NvdTabl 00001000 INTL 20130117)
ACPI: WDTT 0x000000009AFDF000 000224 (v02 ALWARE ALIENWRE 00000001 ASL 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
NODE_DATA(0) allocated [mem 0x45f5ea000-0x45f5edfff]
[ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x45f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00090fff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0x94daffff]
node 0: [mem 0x961b0000-0x9aabefff]
node 0: [mem 0x9afff000-0x9affffff]
node 0: [mem 0x100000000-0x45f5fffff]
Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
On node 0 totalpages: 4164175
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 9747 pages used for memmap
DMA32 zone: 623807 pages, LIFO batch:31
Normal zone: 55256 pages used for memmap
Normal zone: 3536384 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9ba00000-0x9f9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
PM: Registered nosave memory: [mem 0x94db0000-0x961affff]
PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4099087
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16312128K/16656700K available (5480K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 344572K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:488 0
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.060 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.29 BogoMIPS (lpj=8646866)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140926
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
ftrace: allocating 20931 entries in 82 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x0000009ae8c000 end: 0x0000009aeabfff
dmar: RMRR base: 0x0000009b800000 end: 0x0000009f9fffff
IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3720QM CPU @ 2.60GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (41521.33 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 16:26:22, date: 02/08/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044857C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8804484AB800 000303 (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880448556000 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd2000000-0xd23fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd2700000-0xd270ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xd2714000-0xd271400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xd2719000-0xd27193ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd2710000-0xd2713fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xd2718000-0xd27183ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
pci 0000:00:1f.2: reg 0x24: [mem 0xd2717000-0xd27177ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd2715000-0xd27150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
pci 0000:01:00.0: [10de:0fd1] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [mem 0xd2600000-0xd263ffff 64bit]
pci 0000:07:00.0: reg 0x18: [io 0x2000-0x207f]
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd2600000-0xd26fffff]
pci 0000:08:00.0: [8086:088e] type 00 class 0x028000
pci 0000:08:00.0: reg 0x10: [mem 0xd2500000-0xd2501fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd25fffff]
pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:09:00.0: reg 0x10: [mem 0xd2401000-0xd2401fff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D1 D2 D3hot
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:09:00.1: [10ec:5209] type 00 class 0x080500
pci 0000:09:00.1: reg 0x10: [mem 0xd2400000-0xd24000ff]
pci 0000:09:00.1: supports D1 D2
pci 0000:09:00.1: PME# supported from D1 D2 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
vgaarb: no bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0x94db0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x100f] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x0453] could not be reserved
system 00:00: [io 0x0458-0x047f] has been reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x0454-0x0457] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL0552 PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:05: [mem 0xff000000-0xff000fff] has been reserved
system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0x20000000-0x201fffff] has been reserved
system 00:06: [mem 0x40004000-0x40004fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 7 devices
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.0: BAR 6: assigned [mem 0xd1080000-0xd10fffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-06]
pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 07]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xd2600000-0xd26fffff]
pci 0000:00:1c.2: PCI bridge to [bus 08]
pci 0000:00:1c.2: bridge window [mem 0xd2500000-0xd25fffff]
pci 0000:00:1c.3: PCI bridge to [bus 09]
pci 0000:00:1c.3: bridge window [mem 0xd2400000-0xd24fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:07: resource 1 [mem 0xd2600000-0xd26fffff]
pci_bus 0000:08: resource 1 [mem 0xd2500000-0xd25fffff]
pci_bus 0000:09: resource 1 [mem 0xd2400000-0xd24fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3484K (ffff880037922000 - ffff880037c89000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
Simple Boot Flag at 0x44 set to 0x1
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 31866
Key type big_key registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x900x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 5632k, total 5632k
Console: switching to colour frame buffer device 200x56
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Loading compiled-in X.509 certificates
registered taskstats version 1
Magic number: 3:646:438
rtc_cmos 00:01: setting system clock to 2015-02-08 16:26:23 UTC (1423412783)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
random: systemd-tmpfile urandom read with 5 bits of entropy available
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
rtsx_pci 0000:09:00.0: irq 27 for MSI/MSI-X
rtsx_pci 0000:09:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
libata version 3.00 loaded.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:09:00.1: SDHCI controller found [10ec:5209] (rev 1)
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:09:00.1: No vmmc regulator found
sdhci-pci 0000:09:00.1: No vqmmc regulator found
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xd2719000
mmc1: SDHCI controller on PCI [0000:09:00.1] using DMA
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xd2718000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 28 for MSI/MSI-X
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xd2717000 port 0xd2717100 irq 29
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xd2717000 port 0xd2717200 irq 29
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 3B1Q PQ: 0 ANSI: 5
ata3.00: ATA-8: ST9500423AS, 0003DEM1, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST9500423AS DEM1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sdb: sdb1 sdb2 sdb3
sd 2:0:0:0: [sdb] Attached SCSI disk
usb 1-1.5: new high-speed USB device number 3 using ehci-pci
usb 2-1.5: new full-speed USB device number 3 using ehci-pci
tsc: Refined TSC clocksource calibration: 2594.108 MHz
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.7: new full-speed USB device number 4 using ehci-pci
systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture 'x86-64'.
systemd[1]: Set hostname to .
usb 2-1.7: config 1 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
systemd[1]: [/usr/lib/systemd/system/dropbox@.service:3] Failed to add dependency on systemd-user-sessions, ignoring: Invalid argument
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Login Prompts.
systemd[1]: Reached target Login Prompts.
systemd[1]: Starting Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting system-dropbox.slice.
systemd[1]: Created slice system-dropbox.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Slices.
systemd[1]: Reached target Slices.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
EXT4-fs (sda3): re-mounted. Opts: discard
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Started Rebuild Dynamic Linker Cache.
systemd[1]: Started First Boot Wizard.
systemd[1]: Started Create System Users.
systemd[1]: Started Rebuild Hardware Database.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting CLI Netfilter Manager...
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Load/Save Random Seed.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started CLI Netfilter Manager.
systemd[1]: Starting Local File Systems (Pre).
systemd[1]: Reached target Local File Systems (Pre).
systemd[1]: Mounting /tmp...
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounted /tmp.
systemd[1]: Started Journal Service.
systemd-journald[189]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 580000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
sound hdaudioC0D0: autoconfig: line_outs=1 (0xb/0x0/0x0/0x0/0x0) type:speaker
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Mic=0x12
sound hdaudioC0D0: Line=0x11
i915 0000:00:02.0: irq 32 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
wmi: Mapper loaded
ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input5
atl1c 0000:07:00.0: version 1.0.1.1-NAPI
fbcon: inteldrmfb (fb0) is primary device
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7110a2
nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
nouveau [ DEVICE][0000:01:00.0] Family : NVE0
nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
nouveau [ VBIOS][0000:01:00.0] ... signature not found
nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20140926/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003- 2014 Intel Corporation
hidraw: raw HID events driver (C) Jiri Kosina
media: Linux media interface: v0.10
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (064e:8128)
uvcvideo: No streaming interface found for terminal 9.
input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
Switched to clocksource tsc
random: nonblocking pool is initialized
ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:08:00.0: irq 33 for MSI/MSI-X
iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
atl1c 0000:07:00.0 enp7s0: renamed from eth0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
hid-generic 0003:187C:0521.0001: hiddev0,hidraw0: USB HID v1.01 Device [Alienware M14x] on usb-0000:00:1d.0-1.7/input0
iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
ACPI: AC Adapter [ACAD] (on-line)
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
Console: switching to colour frame buffer device 200x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
atl1c 0000:07:00.0: irq 34 for MSI/MSI-X
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
input: Dell WMI hotkeys as /devices/virtual/input/input13
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1659, fw id: 698563
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input14
ACPI: Battery Slot [BAT1] (battery present)
wlp8s0: authenticate with c0:25:06:4b:15:f8
wlp8s0: send auth to c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: authenticated
wlp8s0: waiting for beacon from c0:25:06:4b:15:f8
wlp8s0: associate with c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: RX AssocResp from c0:25:06:4b:15:f8 (capab=0x431 status=0 aid=2)
wlp8s0: associated
nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
nouveau [ VBIOS][0000:01:00.0] using image from ACPI
thermal LNXTHERM:00: registered as thermal_zone1
ACPI: Thermal Zone [TZ00] (28 C)
nouveau [ VBIOS][0000:01:00.0] BIT signature found
nouveau [ VBIOS][0000:01:00.0] version 80.07.49.00.01
thermal LNXTHERM:01: registered as thermal_zone2
ACPI: Thermal Zone [TZ01] (30 C)
nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
nouveau [ VBIOS][0000:01:00.0] running init tables
nouveau 0000:01:00.0: irq 35 for MSI/MSI-X
nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 810 MHz
nouveau [ CLK][0000:01:00.0] 0a: core 270-835 MHz memory 1600 MHz
nouveau [ CLK][0000:01:00.0] 0f: core 270-835 MHz memory 4000 MHz
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
vga_switcheroo: enabled
[TTM] Zone kernel: Available graphics memory: 8158886 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 1024 MiB
nouveau [ DRM] GART: 1048576 MiB
nouveau [ DRM] TMDS table version 2.0
nouveau [ DRM] DCB version 4.0
nouveau [ DRM] DCB outp 00: 04800fb6 0f420010
nouveau [ DRM] DCB outp 01: 04000f72 00020010
nouveau [ DRM] DCB conn 00: 00002046
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau [ DRM] MM: using COPY for buffer copies
nouveau 0000:01:00.0: No connectors reported connected with modes
[drm] Cannot find any crtc or sizes - going 1024x768
nouveau [ DRM] allocated 1024x768 fb: 0x80000, bo ffff880432c24000
nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
fuse init (API version 7.23)
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
sound hdaudioC1D0: hda-codec: out of range cmd 0:6:707:ffffffff
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:07: Allocating resources
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000
pci_bus 0000:08: Allocating resources
pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
pci_bus 0000:09: Allocating resources
pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 09] add_size 1000
pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09] add_size 200000
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x9fb00000-0x9fcfffff 64bit pref]
pcieport 0000:00:1c.2: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xd2800000-0xd29fffff 64bit pref]
pcieport 0000:00:1c.2: BAR 13: assigned [io 0x5000-0x5fff]
pcieport 0000:00:1c.3: BAR 13: assigned [io 0x6000-0x6fff]
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
pci_bus 0000:01: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
wlp8s0: deauthenticating from c0:25:06:4b:15:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.848 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
nouveau [ DRM] suspending console...
nouveau [ DRM] suspending display...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1359.542 msecs
PM: late suspend of devices complete after 13.302 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.437 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.172 msecs
PM: early resume of devices complete after 0.299 msecs
mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
nouveau [ DRM] resuming kernel object tree...
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
usb 2-1.7: reset full-speed USB device number 4 using ehci-pci
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
nouveau [ DRM] resuming console...
usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
PM: resume of devices complete after 779.480 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
atl1c 0000:07:00.0: irq 34 for MSI/MSI-X
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
wlp8s0: authenticate with c0:25:06:4b:15:f8
wlp8s0: send auth to c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: RX AssocResp from c0:25:06:4b:15:f8 (capab=0x431 status=0 aid=4)
wlp8s0: associated
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:07: Allocating resources
pci_bus 0000:08: Allocating resources
pci_bus 0000:09: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
pci_bus 0000:01: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
wlp8s0: deauthenticating from c0:25:06:4b:15:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
nouveau [ DRM] suspending console...
nouveau [ DRM] suspending display...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1342.136 msecs
PM: late suspend of devices complete after 13.224 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.546 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.152 msecs
PM: early resume of devices complete after 0.287 msecs
mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
nouveau [ DRM] re-enabling device...
nouveau [ DRM] resuming kernel object tree...
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
nouveau [ DRM] resuming console...
usb 2-1.7: reset full-speed USB device number 4 using ehci-pci
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
PM: resume of devices complete after 802.650 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
atl1c 0000:07:00.0: irq 34 for MSI/MSI-X
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
wlp8s0: authenticate with c0:25:06:4b:15:f8
wlp8s0: send auth to c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: RX AssocResp from c0:25:06:4b:15:f8 (capab=0x431 status=0 aid=4)
wlp8s0: associated
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
iwlwifi 0000:08:00.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:08:00.0: CSR values:
iwlwifi 0000:08:00.0: (2nd byte of CSR_INT_COALESCING is CSR_INT_PERIODIC_REG)
iwlwifi 0000:08:00.0: CSR_HW_IF_CONFIG_REG: 0X00484b00
iwlwifi 0000:08:00.0: CSR_INT_COALESCING: 0X0000ff40
iwlwifi 0000:08:00.0: CSR_INT: 0X00000000
iwlwifi 0000:08:00.0: CSR_INT_MASK: 0X00000000
iwlwifi 0000:08:00.0: CSR_FH_INT_STATUS: 0X00000000
iwlwifi 0000:08:00.0: CSR_GPIO_IN: 0X0000003c
iwlwifi 0000:08:00.0: CSR_RESET: 0X00000000
iwlwifi 0000:08:00.0: CSR_GP_CNTRL: 0X080403c5
iwlwifi 0000:08:00.0: CSR_HW_REV: 0X000000b0
iwlwifi 0000:08:00.0: CSR_EEPROM_REG: 0X00fa0ffd
iwlwifi 0000:08:00.0: CSR_EEPROM_GP: 0X90000801
iwlwifi 0000:08:00.0: CSR_OTP_GP_REG: 0X00030001
iwlwifi 0000:08:00.0: CSR_GIO_REG: 0X00080042
iwlwifi 0000:08:00.0: CSR_GP_UCODE_REG: 0X00001a6c
iwlwifi 0000:08:00.0: CSR_GP_DRIVER_REG: 0X00000000
iwlwifi 0000:08:00.0: CSR_UCODE_DRV_GP1: 0X00000000
iwlwifi 0000:08:00.0: CSR_UCODE_DRV_GP2: 0X00000000
iwlwifi 0000:08:00.0: CSR_LED_REG: 0X00000060
iwlwifi 0000:08:00.0: CSR_DRAM_INT_TBL_REG: 0X88441dd2
iwlwifi 0000:08:00.0: CSR_GIO_CHICKEN_BITS: 0X27800200
iwlwifi 0000:08:00.0: CSR_ANA_PLL_CFG: 0X00000000
iwlwifi 0000:08:00.0: CSR_MONITOR_STATUS_REG: 0X43f7f757
iwlwifi 0000:08:00.0: CSR_HW_REV_WA_REG: 0X0001001a
iwlwifi 0000:08:00.0: CSR_DBG_HPET_MEM_REG: 0Xffff0000
iwlwifi 0000:08:00.0: FH register values:
iwlwifi 0000:08:00.0: FH_RSCSR_CHNL0_STTS_WPTR_REG: 0X43de6400
iwlwifi 0000:08:00.0: FH_RSCSR_CHNL0_RBDCB_BASE_REG: 0X043de430
iwlwifi 0000:08:00.0: FH_RSCSR_CHNL0_WPTR: 0X000000d8
iwlwifi 0000:08:00.0: FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X80801114
iwlwifi 0000:08:00.0: FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
iwlwifi 0000:08:00.0: FH_MEM_RSSR_RX_STATUS_REG: 0X07030000
iwlwifi 0000:08:00.0: FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV: 0X00000000
iwlwifi 0000:08:00.0: FH_TSSR_TX_STATUS_REG: 0X07ff0001
iwlwifi 0000:08:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
iwlwifi 0000:08:00.0: Loaded firmware version: 18.168.6.1
iwlwifi 0000:08:00.0: Start IWL Error Log Dump:
iwlwifi 0000:08:00.0: Status: 0x000002CC, count: 6
iwlwifi 0000:08:00.0: 0x0000198A | ADVANCED_SYSASSERT
iwlwifi 0000:08:00.0: 0x00015920 | uPc
iwlwifi 0000:08:00.0: 0x00015910 | branchlink1
iwlwifi 0000:08:00.0: 0x00015910 | branchlink2
iwlwifi 0000:08:00.0: 0x0000DBEA | interruptlink1
iwlwifi 0000:08:00.0: 0x00000000 | interruptlink2
iwlwifi 0000:08:00.0: 0x000000BF | data1
iwlwifi 0000:08:00.0: 0x00000008 | data2
iwlwifi 0000:08:00.0: 0x000001DC | line
iwlwifi 0000:08:00.0: 0x31014C0F | beacon time
iwlwifi 0000:08:00.0: 0x76CEB3F1 | tsf low
iwlwifi 0000:08:00.0: 0x00000013 | tsf hi
iwlwifi 0000:08:00.0: 0x00000000 | time gp1
iwlwifi 0000:08:00.0: 0x01649DB4 | time gp2
iwlwifi 0000:08:00.0: 0x00000000 | time gp3
iwlwifi 0000:08:00.0: 0x754312A8 | uCode version
iwlwifi 0000:08:00.0: 0x000000B0 | hw version
iwlwifi 0000:08:00.0: 0x00484B00 | board version
iwlwifi 0000:08:00.0: 0x0000001C | hcmd
iwlwifi 0000:08:00.0: 0xAF863840 | isr0
iwlwifi 0000:08:00.0: 0x1189F800 | isr1
iwlwifi 0000:08:00.0: 0x00000E1A | isr2
iwlwifi 0000:08:00.0: 0x0147FCC3 | isr3
iwlwifi 0000:08:00.0: 0x00000000 | isr4
iwlwifi 0000:08:00.0: 0x00000110 | isr_pref
iwlwifi 0000:08:00.0: 0x000260A4 | wait_event
iwlwifi 0000:08:00.0: 0x000000D4 | l2p_control
iwlwifi 0000:08:00.0: 0x00000000 | l2p_duration
iwlwifi 0000:08:00.0: 0x00000007 | l2p_mhvalid
iwlwifi 0000:08:00.0: 0x00101040 | l2p_addr_match
iwlwifi 0000:08:00.0: 0x00000005 | lmpm_pmg_sel
iwlwifi 0000:08:00.0: 0x13011136 | timestamp
iwlwifi 0000:08:00.0: 0x0000D8E8 | flow_handler
iwlwifi 0000:08:00.0: Start IWL Event Log Dump: nothing in log
iwlwifi 0000:08:00.0: Fw not loaded - dropping CMD: 1e
iwlwifi 0000:08:00.0: flush request fail
ieee80211 phy0: Hardware restart was requested
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
input: FC:F1:52:79:0F:B8 as /devices/virtual/input/input17
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: USB disconnect, device number 2
usb 3-2: new high-speed USB device number 3 using xhci_hcd
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
pci_bus 0000:07: Allocating resources
pci_bus 0000:08: Allocating resources
pci_bus 0000:09: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xd1000000-0xd1003fff]
pci_bus 0000:01: Allocating resources
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
wlp8s0: deauthenticating from c0:25:06:4b:15:f8 by local choice (Reason: 3=DEAUTH_LEAVING)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ...
sound hdaudioC1D0: hda-codec: out of range cmd 0:6:707:ffffffff
(elapsed 0.468 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
sd 2:0:0:0: [sdb] Stopping disk
nouveau [ DRM] suspending console...
nouveau [ DRM] suspending display...
nouveau [ DRM] evicting buffers...
nouveau [ DRM] waiting for kernel channels to go idle...
nouveau [ DRM] suspending client object trees...
nouveau [ DRM] suspending kernel object tree...
PM: suspend of devices complete after 1349.873 msecs
PM: late suspend of devices complete after 13.182 msecs
ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 13.478 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
intel_pstate CPU 1 exiting
kvm: disabling virtualization on CPU1
smpboot: CPU 1 is now offline
intel_pstate CPU 2 exiting
kvm: disabling virtualization on CPU2
smpboot: CPU 2 is now offline
intel_pstate CPU 3 exiting
kvm: disabling virtualization on CPU3
smpboot: CPU 3 is now offline
intel_pstate CPU 4 exiting
kvm: disabling virtualization on CPU4
smpboot: CPU 4 is now offline
intel_pstate CPU 5 exiting
kvm: disabling virtualization on CPU5
smpboot: CPU 5 is now offline
intel_pstate CPU 6 exiting
kvm: disabling virtualization on CPU6
smpboot: CPU 6 is now offline
intel_pstate CPU 7 exiting
kvm: disabling virtualization on CPU7
smpboot: CPU 7 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x1
kvm: enabling virtualization on CPU1
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x2
kvm: enabling virtualization on CPU2
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
kvm: enabling virtualization on CPU3
CPU3 is up
smpboot: Booting Node 0 Processor 4 APIC 0x4
kvm: enabling virtualization on CPU4
CPU4 is up
smpboot: Booting Node 0 Processor 5 APIC 0x5
kvm: enabling virtualization on CPU5
CPU5 is up
smpboot: Booting Node 0 Processor 6 APIC 0x6
kvm: enabling virtualization on CPU6
CPU6 is up
smpboot: Booting Node 0 Processor 7 APIC 0x7
kvm: enabling virtualization on CPU7
CPU7 is up
ACPI: Waking up from system sleep state S3
ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 15.134 msecs
PM: early resume of devices complete after 0.349 msecs
nouveau [ DRM] re-enabling device...
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
nouveau [ DRM] resuming kernel object tree...
mei_me 0000:00:16.0: irq 30 for MSI/MSI-X
nouveau [ VBIOS][0000:01:00.0] running init tables
snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
sdhci-pci 0000:09:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
rtc_cmos 00:01: System wakeup disabled by ACPI
usb 2-1.7: reset full-speed USB device number 4 using ehci-pci
usb 1-1.5: reset high-speed USB device number 3 using ehci-pci
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: configured for UDMA/133
nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
nouveau [ PTHERM][0000:01:00.0] fan management: automatic
nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 648 MHz
nouveau [ DRM] resuming client object trees...
nouveau [ DRM] resuming display...
nouveau [ DRM] resuming console...
usb 2-1.5: reset full-speed USB device number 3 using ehci-pci
ca0132 DOWNLOAD OK :-) DSP IS RUNNING.
PM: resume of devices complete after 752.537 msecs
PM: Finishing wakeup.
Restarting tasks ... done.
atl1c 0000:07:00.0: irq 34 for MSI/MSI-X
iwlwifi 0000:08:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:08:00.0: Radio type=0x2-0x1-0x0
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: configured for UDMA/133
wlp8s0: authenticate with c0:25:06:4b:15:f8
wlp8s0: send auth to c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: authenticated
wlp8s0: associate with c0:25:06:4b:15:f8 (try 1/3)
wlp8s0: RX AssocResp from c0:25:06:4b:15:f8 (capab=0x431 status=0 aid=4)
wlp8s0: associated
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
input: FC:F1:52:79:0F:B8 as /devices/virtual/input/input19
usb 3-2: USB disconnect, device number 3
usb 3-2: new full-speed USB device number 4 using xhci_hcd
hid-generic 0003:054C:0885.0002: hiddev0,hidraw1: USB HID v1.11 Device [MDR-XB950BT] on usb-0000:00:14.0-2/input0
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Disabling via VGA-switcheroo
snd_hda_intel 0000:01:00.1: Cannot lock devices!
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140926/nsarguments-95)
usb 3-2: USB disconnect, device number 4
nouveau E[ VBIOS][0000:01:00.0] 0x630c[0]: script needs connector type
snd_hda_intel 0000:01:00.1: Enabling via VGA-switcheroo